Wishon Golf 770 CFE irons

Model 770CFE irons represent the first set of irons designed with a forged steel, CNC machined, variable thickness face design.
The 770CFE irons are designed with a variable thickness forged face to offer golfers a little higher ball-speed to swing-speed ratio than is possible with a conventional thick face iron design, but also to offer golfers a much better off-center hit forgiveness because of the variable thickness face.
Because irons increase in loft progressively through the set, the actual force of deflection of the face will decrease as loft increases. To help maximize the amount of face deflection as loft increases in the irons, the forged variable thickness face design changes in face material composition and thickness. Thus, the #3 and 4 iron faces are forged from Carpenter 455 high strength steel and are designed with a variable thickness of 2.4mm/1.9mm. Then the #5, 6, and 7 iron faces are forged from 17-7 stainless steel and machined to a variable thickness of 2.5mm/2.0mm. And the #8 through wedge faces are forged from soft 304 stainless and machined to a variable thickness of 2.6mm/2.2mm.
In addition, as loft increases in a set of irons, the actual position of impact on the face will change. To accommodate this natural tendency in iron impact position, the thicker center section of the faces changes in position through the set.
Thus the 770CFE irons are individually computer modeled for face thickness dimension, face thickness position, and face material for each iron in the set to offer the best individual performance possible in a full set of irons.
All 770CFE faces are CNC machined after forging to ensure precision in the face design. The CNC machining marks can be seen on the back of each face.
The body of each 770CFE iron is designed to maximize the area of the face available for face deflection, as well as to move as much of the weight of each head further back from the face and shaft centerline to assist in launch angle.
The sole design of the 770CFE is designed to keep a large amount of mass low, but by beveling the back edge of the sole the sole width is not too wide and ensures proper sole playability from all types of turf and lie conditions.
770CFE irons are finished in a bright satin polish finish, with all faces CNC machined for precision dimensional specifications.

Wishon Golf 560 MC irons

Wishon Golf 560MC Forged Carbon Steel Irons
Full game improvement forged carbon steel irons with fully CNC milled back cavity

Features:

- True Forged from 1035 Carbon Steel for Soft Feel, Even in a Cavity Back.

- Deep Progressive Weight Distribution Cavity Back Created by CNC Machining to greatly increase the MOI of the 560MC heads, higher than any other forged carbon steel cavity back iron.

- Slightly wider, Game Improvement Sole is Custom Ground with Front/Back Radius to Reduce Incidence of "fat" shots.

- Brushed Satin Nickel Chrome Electroplated Finish.

- Larger head shape/size accents the game improvement and off-center hit performance design of the 560MC forged irons.

Wishon Golf 550C irons

550C are a true forged carbon steel design, made from a softer alloy of Carbon Steel called 1035C with lower carbon content for allowing the forging process to pack the steel tighter and improve grain structure and reduce internal voids.
550C is a true Cavity-back design, which means it is forgiving on off-center hits and recommended for all levels of players.
TWGT uses a 5-step forging process which is one more step than most all other forged irons; the additional step is done to compress the steel tighter in the head and to help reduce the amount of grinding that is required to prepare the irons for nickel/chrome electro-plating. This also ensures more consistency of shape in the set.
The progressive offset from 3.5mm in the #2 and 3 irons, down to 2.0mm in the short irons is more like what the pros on the PGA Tour have started to like, more than a total non-offset design.
550C is designed to allow clubmakers to "mix-and-match" with the 550M muscle-back forged iron - to choose any number of irons from each set to make up the full set. Most typical will be to use the #2, 3, 4 from the 550C with the #5, 6, 7, 8, 9, PW from the 550M.
550C has a true "tour grind" shape sole design, which means it is slighly rounded from the front to back, and also has the leading edge and trailing edge rounded to prevent the sole from sticking in the turf when it is used.
All scorelines, hosel bore and even all the logo/wording on each 550C forged ironhead are CNC machined and not stamped for greater accuracy and higher quality.
Finished in Bright Mirror Double Nickel/Chrome plating with a unique new "mini-shot" blast surface in the back cavity.
Available in any set make up or any individual heads #2, 3, 4, 5, 6, 7, 8, 9, PW, AW, SW.

Wishon Golf 550M irons

550M are a true forged carbon steel design, made from a softer alloy of Carbon Steel called 1035C, lower in Carbon content to allow TWGT's forging process to pack the steel tighter in the die to improve grain and eliminate internal voids.
TWGT uses a 5-step forging process which is one more step than most all other forged irons; the additional step is done to compress the steel tighter in the head and to help reduce the amount of grinding that is required to prepare the irons for nickel/chrome electro-plating. This also ensures more consistency of shape in the set.
The progressive offset from 3.5mm in the #2 and 3 irons, down to 2.0mm in the short irons is more like what the pros on the PGA Tour have indicated a preference toward.
550M is designed to allow clubmakers to "mix-and-match" with the 550C cavity-back forged iron - to choose selected ironheads from each set to make up the full set. Most typical will be to use the #2, 3, 4 from the 550C with the #5, 6, 7, 8, 9, PW from the 550M.
550M has a true "tour grind" shape sole design, which means it is slighly rounded from the front to back, and also has the leading edge and trailing edge rounded to prevent the sole from sticking in the turf when it is used.
550M is a true muscle-back design – preferred by better ball strikers.
Finished in Bright Mirror double nickel/chrome plating - all scorelines, hosel bore and all logo/wording on each head is CNC machined and NOT stamped for greater accuracy and higher quality.
Sold in sets of #3 - SW, or individually.

"Pictures used with permission of Wishon Golf"